Researchers Find Method to Make Ethanol From Carbon Monoxide, Replacing Corn | Alternative Energy | Forums

I wonder if this will ever come to fruition, or just one of those discoveries that get shelved and you never hear about it again

Stanford University scientists have found a new, highly efficient way to produce liquid ethanol from carbon monoxide gas. 

This promising discovery could provide an eco-friendly alternative to conventional ethanol production from corn and other crops, the scientists said. Their results were published in the April 9 advanced online edition of the journal Nature. 

"We have discovered the first metal catalyst that can produce appreciable amounts of ethanol from carbon monoxide at room temperature and pressure - a notoriously difficult electrochemical reaction," said Matthew Kanan, an assistant professor of chemistry at Stanford and co-author of the study. 

Most ethanol today is produced at high-temperature fermentation facilities that chemically convert corn, sugarcane and other plants into liquid fuel, but growing crops for biofuels requires thousands of acres of land and vast quantities of fertilizer and water, a Stanford news release noted. In some parts of the U.S., it takes more than 800 gal. of water to grow a bushel of corn, which, in turn, yields about 3 gal. of ethanol. 

The new technique developed by Kanan and Stanford graduate student Christina Li requires no fermentation and, if scaled up, could help address many of the land and water use issues surrounding ethanol production today. 

"Our study demonstrates the feasibility of making ethanol by electrocatalysis, but we have a lot more work to do to make a device that is practical," Kanan said. 

Novel electrodes 

Two years ago, Kanan and Li created a novel electrode made of a material they called "oxide-derived" copper, a term they used because the metallic electrode was produced from copper oxide, Stanford reported. 

"Conventional copper electrodes consist of individual nanoparticles that just sit on top of each other," Kanan said. "Oxide-derived copper, on the other hand, is made of copper nanocrystals that are all linked together in a continuous network with well-defined grain boundaries. The process of transforming copper oxide into metallic copper creates the network of nanocrystals." 

For their study, Kanan and Li built an electrochemical cell - a device consisting of two electrodes placed in water saturated with carbon monoxide gas. When a voltage is applied across the electrodes of a conventional cell, a current flows so that the water is converted to oxygen gas at one electrode (the anode) and hydrogen gas at the other electrode (the cathode). 

The challenge was to find a cathode that would reduce carbon monoxide to ethanol instead of reducing water to hydrogen. 

"Most materials are incapable of reducing carbon monoxide and exclusively react with water," Kanan said. "Copper is the only exception, but conventional copper is very inefficient." 

So, Kanan and Li used a cathode made of oxide-derived copper. When a small voltage was applied, the results were dramatic, according to the news release. 

"The oxide-derived copper produced ethanol and acetate with 57% faradaic efficiency. That means 57% of the electric current went into producing these two compounds from carbon monoxide," Kanan said. "We're excited because this represents a more than 10-fold increase in efficiency over conventional copper catalysts. Our models suggest that the nanocrystalline network in the oxide-derived copper was critical for achieving these results." 

Carbon neutral 

The Stanford team has begun looking for ways to create other fuels and improve the overall efficiency of the process. 

"In this experiment, ethanol was the major product," Kanan said. "Propanol would actually be a higher-energy density fuel than ethanol, but right now, there is no efficient way to produce it." 

In the experiment, Kanan and Li found that a slightly altered oxide-derived copper catalyst produced propanol with 10% efficiency. The team is working to improve the yield for propanol by further tuning the catalyst's structure. 

Ultimately, Kanan would like to see a scaled-up version of the catalytic cell powered by electricity from the sun, wind or other renewable resources. 

For the process to be carbon neutral, scientists will have to find a new way to make carbon monoxide from renewable energy instead of fossil fuels, the primary source today, Stanford reported. 

Kanan envisions taking carbon dioxide from the atmosphere to produce carbon monoxide, which, in turn, would be fed to a copper catalyst to make liquid fuel. The carbon dioxide released into the atmosphere during fuel combustion would be reused to make more carbon monoxide and more fuel - a closed-loop, emissions-free process. 

"Technology already exists for converting (carbon dioxide) to carbon monoxide, but the missing piece was the efficient conversion of carbon monoxide to a useful fuel that's liquid, easy to store and nontoxic," Kanan said. "Prior to our study, there was a sense that no catalyst could efficiently reduce carbon monoxide to a liquid. We have a solution to this problem that's made of copper, which is cheap and abundant. We hope our results inspire other people to work on our system or develop a new catalyst that converts carbon monoxide to fuel." 

The Nature study was co-authored by Jim Ciston, a senior staff scientist with the National Center for Electron Microscopy at Lawrence Berkeley National Laboratory. 

The research was supported by Stanford, the National Science Foundation and the U.S. Department of Energy.

http://growinggeorgi.....cing-corn/