Log In
Home
26 Sep ’13
Offline
Well I've decided that my winter project is going to build me a wood processor.. Im hoping i will be able to process a cord an hour.. Anybody have any info or advice to give me would be great..
15 Feb ’12
Offline
how intricate do you want it to be?
26 Sep ’13
Offline
well to make it cheap and simple im going manual with the saw.. i have my old saw and it still runs so i will use that mounted on a pivot to cut the wood to length. harbor freight has a 6.5hp 212cc gas engine for $120 that i plan on using to drive the hydraulic pump, my plans only call for 2 hydraulic rams, 1 for the splitter and 1 for the lift that lifts the logs up on the processor itself. As far as feeding the log to the saw im going with rollers and a small winch. The winch will be mounted on the far side of the processor so i can run the cable to the end of the log, attach it to the log and winch it into the saw as needed.. If this is somewhat of a success i will eventually switch everything to hydraulics so in theory I will be able to stand in 1 spot and control everything with the hydraulic levers.. What do you think?
15 Feb ’12
Offline
sounds dangerous, I like it! Have you checked craigslist at all for a cheap trailer frame to mount all this on?
3 Nov ’12
Offline
interested. This I gotta see.
26 Sep ’13
Offline
sounds dangerous, I like it! Have you checked craigslist at all for a cheap trailer frame to mount all this on?
best thing about that i havr an old woods trailer made out of a 1 ton truck
Most Users Ever Online: 698
Currently Online:
96 Guest(s)
Currently Browsing this Page:
2 Guest(s)
Top Posters:
easytapper: 2149
DangerDuke: 2030
groinkick: 1667
PorkChopsMmm: 1515
Gravel Road: 1455
Newest Members:
Forum Stats:
Groups: 1
Forums: 12
Topics: 11482
Posts: 58640
Member Stats:
Guest Posters: 2
Members: 19842
Moderators: 0
Admins: 1
Administrators: K
