Log In
Home
27 Aug ’14
Offline
Alright, west, north, and east walls are up.
I have to break the south wall into two pieces to raise it but don't know how to joint if if I don't have a double top plate or double sill plate. Any ideas? Couldn't find anything in the IRC on it and I would rather not fail the inspection if possible.
15 Feb ’12
Offline
We've always use a double top plate for tying the corners together
Do you not have enough clearance for one?
27 Aug ’14
Offline
In hindsight it was a petty reason (I wanted the windows as high as possible so I squeezed out the second top plate). You can see that the header in the wall above is as high as we can take it.
We will also be using the California Corner where possible.
We'll use simpson corner ties that are up to code so I'm not too worried about the corners. My main concern is along the long wall where it'll just be a butt joint between the two sections of wall.
27 Aug ’14
Offline
Started building the last exterior wall last night. Building it in place because I'm not sure we could lift it (20' long) and because I'm doing it by myself.
Then on to the interior walls and the rafters.
15 Feb ’12
Offline
Nice, what does your wife think so far?
27 Aug ’14
Offline
She's pretty excited about the end result, and shw built up all of the headers. However, we're moving out of the country come March so we'll barely get to enjoy it. Should help rental price at least.
Most Users Ever Online: 698
Currently Online:
37 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
easytapper: 2149
DangerDuke: 2030
groinkick: 1667
PorkChopsMmm: 1515
Gravel Road: 1455
Newest Members:
Forum Stats:
Groups: 1
Forums: 12
Topics: 11482
Posts: 58640
Member Stats:
Guest Posters: 2
Members: 19842
Moderators: 0
Admins: 1
Administrators: K
